Panasonic aw-e860 manual

Minimum illumination: 0. In order to prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside.

Avoid striking, shaking, etc. The camera contains sensitive components which could be damaged by improper handling or storage. If the lens is not installed, protect the surface of the prism by placing the body cap into the lens mount hole. Lens fixing ring knob Rotate the lens fixing ring knob counterclockwise and remove the lens mount cap. Mount the lens on the camera and rotate the lens fixing ring knob clockwise in order to fix the lens securely.

This item can be selected by pressing the switch while the menu is on the screen. Lens mounting Rotate the lens fixing ring knob counterclockwise and remove the lens mount cap. Page Camera Mounting 2. Camera mounting 1. When changing the camera mounting adapter, use a screwdriver or similar tool to tighten the screws firmly. Fully open the iris by shooting a dark object. Iris selection switch should be set to M.

Loosen the flange back lock knob. Aim the camera at any object over 2 meters away from the camera. Adjustment of the iris gain, with a screwdriver through the hole may be done as follows. Shape and location of the hole may vary depending on the type of lens. Page Connections Connections Caution: The connection and installation should be done by qualified service personnel or system installers.

Refer any servicing to qualified service personnel. Turn RCU power off before connecting cables. Turn RCB power off before connecting cables. The software and the cable for RSC required for this operation should be obtained locally. Please contact qualified service personnel for this software. Then, when the two different light sources are encountered, you may operate the camera properly by simply change the white balance mode to either AWC A or AWC B.

Try to avoid overly bright objects in the scene. This step is to adjust the black levels pedestal levels of two or more cameras to be the same. Close the lens. U Horizontal phase control Observe the waveform of the external synchronizing input signal black burst signal and video output signal on a two-channel oscilloscope. Horizontal phase cannot be adjusted if the switch is in the CAM position. Functions can be set as best suited to each use mode. ON: The light quantity is adjusted automatically.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below.

Keep these operating instructions handy for future reference. Install in accordance with the manufacturer's instructions. A polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Special notes on operation Major operating controls and their functions Flange back adjustment For zoom lens Iris gain control in a lens Use mode setting Menu item setting Setting and changing the optional cards Setting to initial set Standard accessories A digital video signal processing system is packed in a compact, lightweight body while assuring high picture quality, high reliability and high performance.

In order to protect the environment when the convertible camera is to be discarded at the end of its service life, ask a specialized contractor to dispose of it properly. Digital video signal processing for high quality, high reliability, high performance, lightweight and compact size. Minimum illumination: 0. SET UP menu for system check and readjustments. CCD readout is switchable between field and frame modes.

Vertical resolution can be stepped up in frame mode and it is effective for shooting still objects. The built-in synchronized scanning system reduces noise in computer graphics.

Various correction circuits permit video reproduction with high fidelity. Chroma detail correction enables clear shots of dark color objects. A dark detail circuit provides natural edge correction to any object in a dark scene.

Four use modes for each of your specific applications can be selected. SMPTE color bar is indicated on the monitor screen. Aspect ratio is and selectable. The ATW function under fluorescent illumination can adversely change the white balance. It is an expendable part, and must be replaced about every hours. Whenever fan replacement is necessary, be sure to ask the store where you purchased the set. In order to prevent electric shock, do not remove screws or covers.

There are no user-serviceable parts inside. Avoid striking, shaking, etc. The camera contains sensitive components which could be damaged by improper handling or storage. If the lens is not installed, do not leave the lens mount hole uncovered. Do not operate the camera or RCU if it becomes wet. Do not unnecessarily turn the camera power on and off repeatedly. Do not block the ventilation slots. Internal heat buildup can cause a fire. If the lens is not installed, protect the surface of the prism by placing the body cap into the lens mount hole.

In case the dirt is hard to remove, use mild detergent and wipe gently. Turn the power off and have the unit checked by an authorized service facility. Operate the camera and RCU only when there is adequate ventilation. Rotate the lens fixing ring knob counterclockwise and remove the lens mount cap. Mount the lens on the camera and rotate the lens fixing ring knob clockwise in order to fix the lens securely. Remove the cover, and connect the expansion card box.

For details, refer to the manual for expansion card box. A menu will appear on the monitor screen when this switch is pressed for about 5 seconds. This item can be selected by pressing the switch while the menu is on the screen. The item just below can be selected by pressing this switch while the menu is on the screen.

When the menu is not displayed or the camera is in shooting mode, the automatic white balance control can be set with this switch. The Sub Menu for each item of the Main Menu is displayed when this switch is pressed while the Main Menu is on the screen. While the Sub Menu is displayed, any setting can be brought up to a higher value with this switch. When the menu is not displayed or the camera is in shooting mode, the automatic black balance control can be set with this switch.

The item just below can be selected by pressing this switch while the Sub Menu is on the screen. While the Sub Menu is displayed any setting can be brought down to a lower value with this switch.